Team Xecuter RGX (inc DGX to RGX Conversion)

March 5th, 2013, 00:52 Posted By: wraggster

Team Xecuter RGX (inc DGX to RGX Conversion)
March 02 2013

A few months ago we brought you DGX (Double Glitch-X) which enable the key retrieval from all slim consoles above dashboard version 15572.The DGX was the first and only hack able to do this and worked with great success, enabling the scene to continue on with it's homebrew endeavors. For some bizarre reason some outsiders are claiming that DGX was no good and that it was too slow? The fact that there was NOTHING else that could achieve the hack and the fact that there are hundreds and hundreds of pro modders posting their success stories with boot times between 5 and 30 seconds – I guess that completely went over their heads?In the last week a leaked bootloader has been passed around by sources who wish to remain anonymous which allows booting without knowing the CPU Key, enabling our DGX method to work with a single glitch (which is how normal RGH works). To use simply flash to the 360 using any RGH board. Naturally you will get the very best results using a CR3 Pro – or even a converted DGX

So this now opens two doors:1. Compile a solid set of ECC's for standard RGH boards that can recover keys on Phat models Zephyr, Falcon, Jasper – and slim models Trinity & Corona (Both 16Mb v1/v3 and 4Gb v2/v4). The speed and performance will be no where near as good as the DGX hardware, but it will still work all the same. Much like the DGX, key recovery is a one time process anyway.2. To design a new hack for the DGX hardware so that it can be converted to what we will now call RGX (Regular Glitch-X). As the DGX hardware has similar parts used by the high performance CR3 Pro, the DGX (RGX) can be used as a regular (or not so in this case) RGH board but much faster and better performance than any other 64 based board. In fact the only board out there that will perform better is the CR3 Pro – everything else it will just smoke. DGX R.I.P? Sure it is……Files Included:

• RGX ECC For Zephyr, Falcon, Jasper, Trinity & Corona
• DGX to RGX XSVF Updates for Corona (3 Timing Versions)

Much more coming for DGX as well as new J-Runner and new DGX(RGX) Install guides…….
We see a lot of stores selling the DGX v1.0s & v1.1s quite cheap – I suggest you grab them while you can
Download: http://www.qfpost.com/file/d?g=uX6r8LFHG
UPDATE:

Download: DGX to RGX XSVF Conversion Files for TRINITY http://www.qfpost.com/file/d?g=CUXo4blDc
The usual merry band of Xecuter haters and accusers have typically come out of the woodwork accusing us of stealing blah blah blah. Here's the fact-correcting response to these clowns: http://team-xecuter.com/forums/showp...&postcount=143
UPDATE 2:
SO……JUST TO CLARIFY!
The ability to obtain keys from dashes > 14719 and the DGX to RGX conversion are two separate things.
The ECC files are flashed to the nand (after you have 2 good dumps of them as usual) of the correspondingly named consoles (this replaces creating ECC from your nand) The console in question can be glitched using current RGH2 methods and normal CoolRunners to obtain your CPU Key (You can use CoolRunner Revs A, B, C or CR3 Lite)
In consequence of these ECC files being released, the DGX v1.0s and v1.1s are no longer required to obtain CPU Keys HOWEVER Team Xecuter have been on top of the game and allowed those people who bought a DGX to actually gain from this instead of losing out by being able to convert their DGX into the new fast booting RGX glitch chip for slims.

So lucky owners of a DGX now get a fast booting glitch chip for slims at no extra cost due to the fact that the DGX uses similar technology to the super-fast CR3 Pro. All they have to do is program the newly released RGX XSVF timing files (Slims only – all Trinity (4 timing versions) & Corona (3 timing versions).

• The DGX/RGX is NOT essential to obtain your CPU Keys (this is what the new ECC files are for – you can use any RGH mod like a CoolRunner Rev C)
• The ECC files that we released are our own and not taken and renamed from anyone else. Note that Xell boots to a green colored screen and we also included Zephyr.
• The new RGX XSVF Files are NOT for use by any other chips than the DGX
• The new ECC files are for dashes > 14719 to obtain CPU Key.

http://team-xecuter.com/

There are 0 comments - Join In and Discuss Here