XBOX
EVOLUTION
How to get the extra 2 gigz from your original
xbox HD (v0.1)
Tutorial written by : Robizzle
This tutorial was tested on an xbox modded with a Matrix
chip and evox dashboard V1.8.2812 but should work with any
modded box with that dashboard.
What you need:
1) Modded xbox with evox dash (1.8.1812 or later) installed
2) A 10 gig hdd (I think the only one xbox shipped with is
the segate)
3) FTP ability and knowhow
4) About 10 min
1) Connect to your pc to your xbox using your favorite ftp
client (I like FlashFXP)
2) Create A backup copy of your evox.ini file (i saved mine
to my desktop)
3) Copy the following code into your evox.ini file replacing
everything that is there with this.
4) Save your changes and ftp it back to the xbox. (or in FlashFXP
you could just open it in edit mode)
5) Reboot your xbox, select "Format F:"
6) Select Yes (warning anything on F:\ will be erased)
7) Wait 1/2 a second
8) FTP your original evox.ini file
9) Reboot
10) umm there is no #10.
Tutorial written by : Robizzle
The Hottest DCEmu Posters
|